咨询热线：400-1028-268 
秉持优良的传统，坚持用最佳的结构配置，做为产品高精度基础，再以厚实与轻量仅兼顾的设计原则，为产品创造出高速切削下所需的高刚性及高性能化。
Uphold the fine tradition,adhere to the beststructure configuration, as thebasis of high precision products,and thentakeinto accountthe designprinciple of thick and light weight only, forthe productto create high rigidityand high performance required under high speed cutting.
选购规格及配重
Optional specifications and counterweights
立柱加高:200mm Column height:200mm
刀库:32支刀、40支刀 Knife library: 32knives,4Oknives
刀把:CAT50/DIN50/ISO50 Knife: CAT50/DIN50/IS050
皮带主轴:BT50/8000rmp Belt spindle:BT50/8000RMP
主轴中心出水 Spindle center outlet
X、Y、Z光栅尺 X,Y,Z grating ruler
自动刀长量测装置 Automatic toollength measuring device
自动刀工件量测装置 Automatic tool measuring device
温升热度位补偿系统 Temperature rise heat level compensation system
侧铣头 Side milling head
机械特性
MECHANICAL PROPERTIES
| ◇ | 横梁为一体铸造成型，结构设计采用高刚性箱型结构体，外型为桥梁式拱形设计，能有效支撑垂直重力与横向抗力，并在切削发挥最佳刚性。 |
| The beamis cast as one, the structure design adopts high rigidity box structure.the shapeis bridge arch design, can effectively supportverticalgravity and transverse resistance, and play the best rigidity in cutting. | |
| ◇ | 主轴中心与Z轴滑轨最小距高设计，缩短切削力臂，大幅度提升切削刚性。 |
| The minimum distance between the main shaft center and the Z-axis slide railis designed to | |
| shorten the cutting force arm and greatlyimprove the cutting rigidity. | |
| ◇ | Z轴配置两组高压空气缸配重，可同步平衡机头重量。 |
| Zaxis is equipped with two groups of high pressure air cylindercounterweight, which canbalance the nose weight synchronously. |
UT-380五轴联运加工中心
UT-430五轴高速加工中心
电话咨询
产品展示
客户中心
联系我们